Elpro Technologies CONDOR 415U-1 Series, Configuration Manual

Page: 39 / 41

User Manual Condor 415U-1-Cx Battery Powered Wireless IO
Version 1.4 39
415U-2-Cx/-E Register Map Reference
Digital output registers (coils)
Address range
Description
0001 – 0008
Local DIO1 – DIO8 as digital outputs
0009 – 0020
Spare
0021 – 0400 Space reserved for locally attached 115s expansion I/O modules. Twenty
register per module address, maximum number of modules is 19.
0401 – 10000 General purpose bit storage used for: Staging area for data concentrator;
Fieldbus mappings storage; Force mapping registers
Digital input registers (bits)
10001 – 10008
Local DIO1 – DIO8 as digital inputs
10009 – 10020
Set point status from analog inputs 1 through 12
10021 – 10400 Space for locally attached 115s expansion I/O modules. Twenty register per
module address, Maximum number of modules is 19.
10401
Reserved - Used for repeater status indication
10402-10405
Radio hard fault status flags
10402
Radio power amplifier over temperature
10403
Radio general hardware fault
10404
Radio frequency lock error
10405
Antenna VSWR fault
10406 – 20000 General purpose bit storage used for: Staging area for data concentrator;
Fieldbus mappings storage;
Input registers (words)
30001 – 30004
Local AI1 – AI4 (analog inputs, current mode)
AI1 and AI2: 4 – 20 mA differential
AI3 and AI4: 4 – 20 mA sink
30005
Local supply voltage 0 – 40 V scales to 0-20mA
30006
Local 24 V loop voltage 0 – 40 V scales to 0-20mA
30007
Local battery voltage 0 – 40 V scales to 0-20mA
30008
115S supply voltage 0 – 40 V scales to 0-20mA
30009 – 30010
Local AI1, AI2, Voltage Mode. 0-24V Scales to 0-24mA.
30011 – 30012
Local AI3, AI4, Voltage Mode. 0-5V Scales to 0-20mA
30013 – 30016
Local pulse input rates: PI1 – PI4
30018 – 30020
Spare
30021 - 30400 Space for locally attached 115s expansion I/O modules. Twenty registers per
module address, maximum number of modules is 19.
30401 RSSI: When configured as a Remote, MeshNode, Repeater, or Manual Client,
the RSSI of the connected upstream device in (negative)dBm
30402 Connected Time: When configured as a Remote, MeshNode, Repeater, or
Manual Client, the time (in hours) that the connection to the upstream
device has been made.
30403 Generation Count: When configured as a Remote, MeshNode, Repeater, or
Manual Client, the generation count of the connection to the upstream
device.
This is the number of times the connection has been lost and re-established
30404 – 30405 Upstream IP Address: When configured as a Remote, MeshNode, Repeater, or
Manual Client, the IP Address of the upstream device.