Maintenance and repair
© Elma GmbH & Co KG
BA/Elmaflame/GB/1107
39
8.8
Removal of vapourizer liquid
For shipment of the Elmaflame unit, and for particular
maintenance works, remove all vapourizer liquid from the unit.
Dispose of the residual vapourizer liquid as described in
section
9.3.
Caution when handling vapourizer liquid! Risk of fire and
explosion due to ignition sources and electrostatic charging!
When handling vapourizer liquid keep away from any ignition
sources!
Avoid electrostatic discharging!
Touch the cap nuts on the holding angle pieces of the top part
with both hands for a short period of time before you open the
vapourizer glass container. This will branch off any possible
electrostatic charging of the operator without any risk!
WARNING!
How to proceed
1. Switch off the gas production at the
on/off
key
at the
operating panel.
2. Unscrew the fastening ring by turning it to the left (
see
illustration 8.1.3.D
.).
3. Remove the vapourizer glass. Move the complete top part
sideways to facilitate removal of the vapourizer glass.
4. Remove the vapourizer liquid.
6. Fill the vapourizer liquid into a specially marked tank and
store out of reach of unauthorized persons, in particular of
children. Or dispose of the electrolyte as described in
section 9.2
.
5. Remount the vapourizer glass by screwing the fastening
ring back to the right (
see illustration 8.1.3.E
.).
Summary of Contents for Elmaflame 140
Page 42: ......
