General
4
BA/Elmaflame/GB/1107
© Elma GmbH & Co KG
1 General
The present operating instructions are part of the delivered
equipment. The operating instructions must be kept within easy
reach and remains with the unit in case of resale.
Carefully read the operating instructions before you put the unit
into operation. Operate the electric unit only in compliance with
the instructions given in the present manual.
We reserve the right to carry out technical modifications on the
units due to advanced development.
Reprints, translations and copying of any kind, even of parts of
the document, are subject to prior written authorization by the
manufacturer.
The copy right remains with the manufacturer of the unit.
2
Important safety warnings
Carefully read and observe before putting into operation!
The present unit operates with acid, flammable and –
depending on the type of vapourizer liquid – toxic substances.
Therefore, a predetermined operating sequence and strict
observance of the safety and protection measures described
below are prerequisite.
Instructions for the
operator
The present operating instructions cannot take each and every
specific regulation into consideration which might apply in
various countries. The operator of the unit must ensure that all
relevant local regulations concerning the prevention of
accidents and the use of hazardous substances are known and
observed.
Elmaflame soldering and welding units are intended for
soldering, welding and melting of metals. Operation is
allowed by industrial and commercial businesses only.
Intended use
The unit must be operated by specialized, trained staff only.
The operating instructions must be strictly observed. The unit
must not be operated by unauthorized persons or by children.
Operating staff
For reasons of safety, the unit must be connected to a
shockproof socket only. The technical data indicated on the
nameplate must correspond with the available local connection
conditions, particularly with regard to mains voltage and current
consumption values.
Mains connection
For maintenance and service works, in case of liquid inside the
unit and malfunctions, and when you have finished working with
the unit pull the main plug. In case of a malfunctioning please
contact your supplier or the manufacturer.
Risks due to electric
current
The unit must be opened by authorized and specialized staff
only!
Summary of Contents for Elmaflame 140
Page 42: ......
