Elma Elmaflame 140 Manual Download

Page: 39 / 43

Maintenance and repair

BA/Elmaflame/GB/1107

8.5 Repair

Repair and maintenance works that require the unit to be
connected and opened must be carried out by authorized
specialized staff only.

Opening of the unit

by authorized

specialized staff only

Risk of electrocution due to live parts inside the unit!

Pull the mains plug before you open the unit!

The manufacturer cannot be held liable for any damage caused
by unauthorized repair works on the unit.

WARNING!

In case of a break down of the unit please contact your supplier
or the manufacturer.

8.6

Transportation of the unit

For reasons of safety the unit must be shipped only when
empty! Electrolyte and vapourizer liquid are hazardous
substances!

CAUTION!

1. Remove the electrolyte (

see section 8.7

.).

Prepare the unit for

shipment

2. Remove the vapourizer liquid (

see section 8.8

.).

3. To avoid transport damages:

a. Remove the unit top part.

b. Cover the reactor outlet with the original yellow plastic

cap.

Pack and ship the unit in the original packing box.

When filled the unit must be transported in upright position only.
When the filled unit is tilted, it may be damaged considerably!

Transportation to or

from the workplace

Summary of Contents for Elmaflame 140












































Search results

Summary of Contents for Elmaflame 140

Reviews:

Related manuals for Elmaflame 140

Brands by name

Popular brands

Elma Elmaflame 140, Manual

Search results

Summary of Contents for Elmaflame 140

Reviews:

Related manuals for Elmaflame 140

Brands by name

Popular brands