© 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 18 TERRA 180/182 - 250/252 – 320/322
4.5. Removing of adjustment clip
To adjust the internal end stops it is absolutely necessary that the nosings are not active.
Deactivate them with the adjustment clip. To activate the nosings for regular operation,
remove the adjustment clip. Pull the clip out of the gate opener using the adhesive strap.
Marks
(see 4.8f)
Adjustment clip
Gear shaft
Pinion
Drawing 11
For perfect operation of the gate system it is now necessary to activate the pressure
relief for the electromagnetic bolt.
a. Press the button
LERN
on the controller for approx. 2 seconds (display shows P1)
b. Push
button
BT
a few times until the display shows
PC
.
c. Push
button
LERN (
display shows
S1)
d. Push
button
BT
(display shows
S2)
. Confirm with button
LERN
.
e. Push
button
BT a few times until
the diplay shows
PP
.
f. Push
button
LERN
.
g. The selection is now active.
Save the adjustment clip with the manual. Do not dispose of the adjustment
clip!
