© 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 25 TERRA 180/182 - 250/252 – 320/322
8. Programming MO36
For programming and to set operating parameters, use the two-digit 7-segment display
and the buttons BT, BTG and LERN.
At least the following sequences have to be learned as basic
configuration:
P1
- Learning of running distance
P2
- Selecting of force and speed
PC - Pressure relief of electromagnetic bolt (see notes!)
8.1. Learning sequence
During normal operation the display is off. The learning sequence is activated by pushing
the button LERN for approx. 2s. The display shows
P1
. The sequence 1 is pre-set. With
the button
BT
you can move on to the next sequence P2, P3 etc.
With the button
BTG
you can move back to the last sequence. When the required
sequence is displayed it has to be activated with the button
LERN
.
Sequence Function
P1
-
Selection one wing / two wings
-
Adjusting of end stops
-
Learning of safety contact profiles and photo-cells connected
-
Learning of running distance
P2
Adjusting of force and speed
P3
Adjusting of time lag of the pedestrian wing during closing
P4
Adjusting of time lag of main wing during opening
P5
Learning and deleting of radio remote control codes for BT, BTG and MULTI
P6
Automatic closure for complete opening (for both wings)
-
activating / deactivating
- change
stay-open
time
P7
Automatic closure for pedestrian wing
-
activating / deactivating
- change
stay-open
time
P8
Selecting of warning prior to opening and closing
P9
Selecting of photo-cell function
PA
Activating / deactivating photo-cell testing
PB
Activating / deactivating lockage function for photo-cells
PC
Selecting pressure relief of electromagnetic bolt
PD
Selecting wind blast suppression
PE
Selecting mode of multi-functional relay
PF
Return to original settings
PP
Saving of data and returning to regular mode
Table 9
