P 2500 - P 5000
3
1
Preface
1.1
General notes
These operating instructions must be available on site at all times. It should be
read thoroughly by all persons who use, or service the products. Improper
usage or servicing or ignoring the operating instructions can be a source of
danger for persons, or result in material damage. If the meaning of any part of
these instructions isn’t clear, then please contact ELKA-Torantriebe GmbH u.
Co. Betriebs KG before you use the product.
This applies to all setup procedures, fault finding, disposal of material, care
and servicing of the product. The accident prevention regulations and
applicable technical regulations (e.g. safety or electrical) and environment
protection regulations of the country in which the product is used also apply.
All repairs on the protuct must be carried out by qualified persons. ELKA-
Torantriebe GmbH u. Co. Betriebs KG accepts no liability for damage which is
caused by using the product for purposes other than those for which it is built.
ELKA-Torantriebe GmbH u. Co. Betriebs KG cannot recognise every possible
source of danger in advance. If the product is used other than in the
recommended manner, the user must ascertain that no danger for himself or
others will result from this use. He should also ascertain that the planned use
will have no detrimental effect on the product itself. The product should only
be used when all safety equipment is available and in working order. All faults
which could be a source of danger to the user or to third persons must be
eliminated immediately. All warning and safety notices on the products must
be kept legible.
The electrical periphery equipment must comply with local regulations /
legislation. Only the use of ELKA accessories and original ELKA spare parts is
allowed. In case of any contravention ELKA disclaims liability of any kind.
INFORMATION!
The operation of the system must also be conformant with the safety-relevant
directives and standards.
We reserve the right to make technical improvements without prior notice.
Summary of Contents for P 2500
