Eliet Maestro City Electro, Manual

Page: 53 / 54

53
English
Place the clamping bolts back in the engine plate. Turn the bolts till the moment where there
is no tension on the bolts. Now, see if the blade shaft is aligned relative to the Central nylon
support block. The air gap between the blade shaft and nylon support block must be equal
everywhere. If not, rotate the engine a little to adjust this. Now you tighten the fixing bolts of the
engine securely.
16.4 Dismantling the infeed hopper
For easy transporting of the machine in a car or other vehicle, the feed hopper can be disman-
tled.
Screw both screws bolts out of each side of the hopper, first
screw out the left bolt, afterwards the right one.
The engine should be turned off for this maintenance. Once
the screws are gone, the funnel can be removed. Support the
hopper with you right hand, while lifting the hopper out of its
position with your left hand.
Caution:
Be careful when putting the hopper on the ground. Don’t drop it. This could
severely deform the hopper, making it no longer fit correctly on the machine.