STOP
MOTOR
3
2
1
B
Q 505 010 500
Montage volgorde:
Ordre de montage:
Montageanleitung:
Order of assembly:
Voor openen van zeef
Avant d’ouvrir la grille
Before opening screen
Bevor Öffnen des Siebes
Binnen de 5 eerste arbeidsuren na het vervangen of draaien
van de messen zal men de spanning op de mesbouten
controleren.
Dans les 5 heures d’usage après le remplacement ou
retournement des couteaux, on contrôlera la tension
sur les boulons des couteaux.
Within the 5 first hours of use after renewal or reversing
knives, tension on all knifebolts should be checked.
Nach Austausch oder Wenden von Messern, muss
innerhalb der ersten 5 Betriebsstunden die Spannung
der Messerschrauben kontrolliert werden.
•
•
•
•
12
English
These icons are pictured on the left side of the feed
hopper. When performing a maintenance to the ma-
chine, always turn off the engine. Put the switch on
the engine to the OFF-position, in order to provide
accidentally turning on the engine. Do not allow
third parties near the machine while performing a
maintenance. Always read the user manual before
performing a maintenance to the machine or to the
engine.
(Item number: BQ 501 020 310)
This sticker is put on the safety screen inside the
feed hopper. This sticker warns the user of the dan-
ger of hand injuries and of flying debris. These are
two risks – inherent in chipping branchy material –
which are cared for by the safety screen. This sticker
reminds the user how to operate the shredder in a
safe way. No attempt should be made to put your
hands past the safety screen!
(Item number: BQ 505 010 140)
This icon is pictured on the left side of the feed hop-
per. This sticker reminds the user to keep bystanders
out of the area during machine operation.
(Item number: BQ 501 020 310)
This decal is located on the protection chamber
of the knife axle. It reminds the user to check the
tension on the blade bolts regularly. The decal
describes the manner of disassembly and assembly
of the screen, and warns the user to switch of the
engine before opening the screen.
The decal also warns the user for the danger of
cut wounds to hands, and for the danger of debris
projection when opening the sieve.
(Item number: BQ 505 010 500)
Summary of Contents for Maestro City Electro
Page 1: ...M A N U A L Maestro City Electro...
Page 9: ...9 English 6 2 Engine electric 3000W 230V...
Page 54: ...BZ 201 223 003...
