70 cm
29
English
10. Transporting the machine
• Make sure to clear the shredding chamber before moving the machine. Make sure the infeed
opening is free of branchy material.
• When moving the machine over greater distances (over 2m - 8ft), always take care to turn off
the engine.
• The chipper is designed be in stationary position while working. This means that both the
wheels and support legs are on the ground. To transport the machine you have to put it in
transport position. To do this, grab the handle to the funnel and tilt the machine to the front till
it is in a balanced position. (The handle is on +/- 70 cm - 27
½
” of the ground).
• Then, grasp the chassis upper tube with your left hand while holding the feed hopper handle
with your right hand. In so doing, you can hold the machine with a firm grip for smooth pulling
and pushing.
• Only adults may move or transport the machine.
• Also, during the transport, do not allow children, unauthorised persons or animals within a
radius of 5 m - 15ft around the machine.
• The infeed hopper can be disassembled for an easier transportation of the machine in a car.
(“read § 16.4 Dismantling the infeed hopper” on page 53) .
• To slide the wheel holder out of the frame, tilt the machine 15 cm - 6 inch over the support feet
till the wheels are about 15 cm - 6 inch above the ground. Put your foot on the connection tube
between the wheels and push it down out of the chassis. (First, check whether the wheel holder
is not secured to the right lower side with a pressure screw (M8).
Summary of Contents for Maestro City Electro
Page 1: ...M A N U A L Maestro City Electro...
Page 9: ...9 English 6 2 Engine electric 3000W 230V...
Page 54: ...BZ 201 223 003...
