22
English
• Place the handle in the feed hopper, align the upper holes. In-
sert a M6 bolt with flat washer true the feed hopper and handle.
Slide a nylon strap on the bolt and screw the bolt into the rub-
ber silent bloc. Same for other hole and tighten (wrench #10) till
handle hit the feed hopper.
• Now take the protection plate. Slide first the nylon strap on
the treads from the silent blocs and put the protection plate in
place. Use a flat washer and an M6 nut to hold the protection
plate in place (wrench #10).
• Next we fix the handle at the bottom. Take 2 hex bolts and 2 flat
washers and insert them from the top and use 2 flat washers
and 2 M6 nuts and tighten (hex #4 wrench#10).
• Once the wheels are under the chassis, you will mount the feed
hopper. Slide the feed hopper over the neck in order that the 2
slits hook onto the chassis pins and position the upper part in
order that the recessed channel in the feed hopper hooks on
the long notch from the chassis (this will keep the feed hopper
in place). Put some grease on the thread of both screws (hang-
ing on the chain). Now turn the screw on both side till tight
(without those at the end the safety switches will disactivate the
engine).
Summary of Contents for Maestro City Electro
Page 1: ...M A N U A L Maestro City Electro...
Page 9: ...9 English 6 2 Engine electric 3000W 230V...
Page 54: ...BZ 201 223 003...
