Elgas DATCOM, Operating Instructions Manual

Page: 193 / 228

Appendix
2: ELCORplus version for Zone 2
191
Module EXT1 (KP 100 130) – analog inputs AIN: (terminals EXT1-T: GND, AI1, GND, AI)
Ui = 28 V
Ii = 93 mA
Pi = 0,66 W
Ci = 40 nF
Li = 0
Module EXT1 (KP 100 130) - Internal Bus IB1: (terminals EXT1-T: GND, U+, D+, D-)
8/
Same parameters as Internal Bus IB0 and IB1
8/ only for ELCORplus
3.2 Terminals with protections „nA“
Digital outputs DOUT: (terminals U0+, GND0, DO1, DO2, DO3, DO4)
U = 15 V
RS485 interface - KP 100 110: (terminals SLOT1,2 TERMINALS: D+, D-, GND, U+)
U = 5 ÷ 15 V
RS232 interface - KP 100 110: (terminals SLOT1,2 TERMINALS: GND, CTS, RXD, TXD)
U = ± 15 V
Analog inputs AIN - KP 100 112: (terminals SLOT1,2 TERMINALS: GND, AI1, GND, AI2)
I = 0 ÷ 25 mA
Analog outputs AO - KP 100 113: (terminals SLOT1,2 TERMINALS: AO1+, AO1-, AO2+, AO2-)
U = 5 ÷ 28 V
Power voltage 230 VAC (module PWR3, TERMINALS: N,L)
Un = 100 ÷ 240 VAC, 50/60 Hz
Power voltage 24 VDC ( module PWR4/24, TERMINALS: +U, -U)
Un = 20 ÷ 32 VDC
Power voltage 12 VDC ( module PWR4/12, TERMINALS: +U, -U)
Un = 10 ÷ 16 VDC
Degree of cover protection: IP66
Ambient temperature: -25 °C ≤ Ta ≤ +60 °C