![background image](http://html.mh-extra.com/html/electrothermal/ia-9100/ia-9100_instruction-book_2386099011.webp)
Page 11 of 40 M8144
Issue 2.0
7.1.1. Connect the mains supply lead and power supply to your IA as illustrated.
7.1.2. The lense hood attachment is optional
It’s purpose is to assis in viewing the sample
when using the IA in direct light. Slide the lense hood over the threaded back section of
the lense as illustrated.
7.1.3. Adjust the arm height and oven head angle to suit by loosening the clamp screws and
adjusting as required. Retighten the clamp screws after making adjustments. Always
loosen the clamp screws before making adjustments.
7.1.4. Turn on at the mains electical supply and observe the IA goes through a warm up and
self check routine which include a diplay of the Model type, the firmware issue release
number. Once the clock and date have been set the 9200 and 9300 models will display
the real time and date during the warm up procedure.