Electrothermal IA 9100, Instruction Book

Page: 31 / 40

Page 31 of 40 M8144
Issue 2.0
8.
TECHNICAL SPECIFICATION.
8.1. The specified data for each instrument is shown in the table below.
IA9100 IA9200 IA9300
32- bit processor.
  
3 capillary Tubes up 2mm OD (storage for pack).
  
Tube guide removal for cleaning and use of cold finger
  
40mm dia lens (magnification x 8) removable and with
ajustable focus.
  
13
– key membrane keypad   
Sample presevation ceiling temperature selection
  
White
3 x Super Flux LED’s
  
Selectable ramp rate of 1.0°C/min and 10.0°C/min

Ramp rate Selectable with a 1.0°C/min default setting
ranging from 0.2°C/min to 10°C/min.
 
Date and time facility
 
PC output facility
 
Printer output facility
 
USB output to Pen key.
 
4 x 1 Melt memory capacity
 
3 x 2 Melt memory capacity

Batch memory capacity of 500 melts

Batch memory capacity of 2000 melts

Serial printer connection facility
 
Pack of 50 capillary tubes
  
8.2. General specification.
Electrical specification
Total power consumption 45W
Oven control Closed loop P.I.D.
Oven illumination
3 x white Super Flux LED’s
Illuminous Intensity (per LED) 3500 Lux
Oven operating temperature range. 5°C to 400°C
Power supply PSU
When ordering a replacement PSU, always quote the IA9000 instrument’s serial number.
Input voltage 100
– 240V~50.60Hz.
Output voltage 15V DC
General specification
Temperature display range 1°C to 405°C
Display resolution 0.1°C
Accuracy ± 0.5°C @ 20°C linerly to ± 1.0°C @ 350°C
Ramp rate From 0.2°C/min to 10°C/min settable in increments
of 0.1°/min (Not 9100)
Ceiling temperature setting From 5°C above set temperature to 405°C in
increments of 1°C
Time and date Settable with date display as MMDDYY or
DDMMYY. Time selectable in 12 or 24 hour format.
(Not 9100)
Display 12 x 2 backlit matrix LCD
Control Sensor Platinum Resistance Probe (PT100).