manualshive.com logo in svg

Electrothermal IA 9100, Instruction Book

Share
Download
Electrothermal IA 9100 Instruction Book Download Page 23

 
Page 23 of 40                                                                            M8144         

                                                                

Issue 2.0           

 

 

 

To exit viewing melt data without viewing all the stored data press the ‘Fn’ to 
sequence into the printing option. 
 
To exit viewing the melt data and return to F2 screen inorder to view another stored 
batch press the ‘C’ key. 

 

7.6.19.  You are now asked if you wish to print out the recorded data. Press 1 for yes or 2 for 

no. Ensure a printer is connected before selecting 1 for a print.  

 

7.6.20.  You are now asked if you which to output the data via a USB Pendrive. Press 1 for 

yes or 2 for no. If you press 1 for yes you are asked to insert a USB flash drive. Your 
data will be uploaded to the flash drive. It can be read on your PC using ‘Notepad’.  

 

7.6.21.  You are asked if you want to send the melt data direct to your PC. Press 1 for yes or    

2 for no. Ensure your IA is connected to your PC using the slave socket 

 

7.6.22.  You are asked if you wish to delete stored data. Press 1 for yes or 2 for no. You are 

now returned to the F1 home screen. 

 

F3 Setup Mode. 

 

7.6.23. 

From the F1 home screen press the ‘Fn’ key twice to enter F3 setup mode screen. 

Press the return key to accept access.  
 

7.6.24.  Time and date settings and adjustments are made here. See section 7.3.  
 

 

 

ECO Mode settings 9300. 

7.6.25.  From the 

F1 home screen press the ‘Fn’ key twice to enter F3. Setup mode. Press 

‘Enter’ key to select setup mode. You may now change the time and date (see 7.3) or 

Press the ‘Fn’ key again to enter ECO mode settings. 

. To decline 

press the function key where you are taken back to the F1 home screen. 

7.6.26.   

 

Eco Mode is provided to save on power when the IA keypad remains untouched for a 
pre specified length of time. The default setting is one hour unless adjustments are 
made. Upon subsequent use the settings will be remembered until the IA is turned off at 
the mains electrical supply. Power resumption will see the IA9300 return to the default 
setting. As well as being able to select the ECO power off time the user can select 
which functions of the ECO facility they wish to have operational. The default setting for 
the oven on / off is always oven on. 

 
 
 
 

Summary of Contents for IA 9100









































Reviews:

No comments

Brands by name

Popular brands

Load more brands