![background image](http://html.mh-extra.com/html/electrothermal/ia-9100/ia-9100_instruction-book_2386099016.webp)
Page 16 of 40 M8144
Issue 2.0
7.4.12.
ECO Mode settings. IA9100
.
Eco Mode is provided to save on power when the IA keypad remains untouched for a
pre specified length of time. The default setting is one hour unless adjustments are
made. Upon subsequent use the settings will be remembered until the IA is turned off at
the mains electrical supply. Power resumption will see the IA9100 return to the default
setting. As well as being able to select the ECO power off time the user can select
which functions of the ECO facility they wish to have operational. The default setting for
the oven on / off is always oven on.
7.4.13.
From the home screen press the ‘Fn’ twice to enter F3 ECO Mode.
To accept entry to ECO mode press the ‘Enter’ Key. To decline
press the function key where you are taken back to the F1 home screen.
7.4.14.
Use the key pad to set the hours and minutes the required before the ECO mode
power saving cuts in.
. (To enter 1 hour 30 minutes press 0130). By
entering H00 M00, ECO mode will never be activated.
Press ‘Enter’ to accept the time
setting. Press clear to re-enter a different time.
Note:
The minimum settable time is 1
hour. The maximum is 12 hours.
7.4.15. You are now asked if you wish for the oven to be turned off as well as display and
back light LED’s. Press 1 for yes and 2 for no.
The IA display will
revert back to the F1 home screen.
7.4.16. When the IA enters ECO mode the Oven illumination LED will turn off. The display
back light will also extinguish and depending on the selection made so may the oven.
To show the IA is in ECO sleep mode the display will either display ‘ECO Sleep Oven
of
f’ or ‘ECO sleep Oven on’ accordingly.
7.4.17. To awaken the IA press any key on the keypad. The IA will return to its pre sleep
condition.
7.5. IA9200 Operation.
7.5.1. Connect the IA to the power supply. It will perform a self check while displaying the
model, date (see 7.3 for date and time setting or adjust from F3 screen if not already
set) and firmware version. The display will then turn to the home screen which says
‘Ready’ and shows the IA ovens current temperature.