Page 20 of 40 M8144
Issue 2.0
Eco Mode is provided to save on power when the IA keypad remains untouched for a
pre specified length of time. The default setting is one hour unless adjustments are
made. Upon subsequent use the settings will be remembered until the IA is turned off at
the mains electrical supply. Power resumption will see the IA9200 return to the default
setting. As well as being able to select the ECO power off time the user can select
which functions of the ECO facility they wish to have operational. The default setting for
the oven on / off is always oven on.
7.5.26. Use the key pad to set the hours and minutes the required before the ECO mode
power saving cuts in.
. (To enter 1 hour 30 minutes press 0130). By
entering H00 M00,
ECO mode will never be activated. Press ‘Enter’ to accept the time
setting. Press clear to re-enter a different time.
Note:
The minimum settable time is 1
hour. The maximum is 12 hours.
7.5.27. You are now asked if you wish for the oven to be turned off as well as display and
back light LED’s. Press 1 for yes and 2 for no.
The IA display will
revert back to the F1 home screen.
7.5.28. When the IA enters ECO mode the Oven illumination LED will turn off. The display
back light will also extinguish and depending on the selection made so may the oven.
To show the IA is in ECO sleep mode the display will either display ‘ECO Sleep Oven
off’ or ‘ECO sleep Oven on’ accordingly.
7.5.29. To awaken the IA press any key on the keypad. The IA will return to its pre sleep
condition.
7.6. IA9300 Operation.
7.6.1. Connect the IA to the power supply. It will perform a self check while displaying the
model, date and firmware version. The display will then turn to the home screen which
says ‘Ready’ and shows the IA ovens current temperature.
7.6.2.
Function key operation. (Fn).
The function key is used for scrolling through the sub
menus of the 9300 model. Each time the Fn key is pressed the IA will enter the next
sequential function screen. The main home screen is F1 from which settings are made
and melts are performed. From F1
press the Fn key and the sub menu F2 ‘Stored data’
appears. The F2 sub menu is used for recalling saved melt information together with
selecting data output methods. From F2 press the Fn key to access F3 the sub menu
the settings menu. Within the settings function the time clock can be access for making
time and date setting and adjustments. Pressing the Clear ‘C’ key from F2 or F3 will
return you to F1 home screen.
