IMAGESTAR HD USER GUIDE
Section 3: Configuration
I460GB issue 4
Page 57
Updating an ImageStar HD (Input/Output Settings)
Any changes that you make to the network settings in ImageStar HD Configuration are not
automatically sent to the actual
ImageStar HD
device. To implement any new settings you must first
‘connect’ to the device and then ‘update’ it.
To connect to an ImageStar HD…
In the
Network
window, click the
Local Name
of the required device.
Click the
Network
menu and choose
Connect
(or
Connect All
to connect all devices at once).
The
Status
of the device will now show
Connected
:
NOTE
:
If the connection attempt fails for any reason, the following message will appear:
To disconnect from an ImageStar HD…
In the
Network
window, click the
Local Name
of the required device:
Click the
Network
menu and choose
Disconnect
(or
Disconnect All
to disconnect from all
devices at once).
The
Status
of the device will now show
Not connected
:
NOTE
:
If the following message appears it indicates that the device was already
disconnected:
