IMAGESTAR HD USER GUIDE
Section 1: Introduction
I460GB issue 4
Page 17
Control Capability
Front Panel Control
The
SELECT
push-button on the front panel provides source selection. Each press will switch to the
next source input. The currently selected source input is shown by the four
INPUT
indicators (labeled
1
to
4
).
IR Control
This feature is not currently supported.
Configuration Software
Initial setup and remote control of the
ImageStar HD
is achieved using the ImageStar HD
Configuration software running on a separate PC or laptop. For further details, see Section 3.
NOTE
:
For more detailed information about the control protocol used by ImageStar HD and how to
control it via HyperTerminal, refer to Appendix A.
