IMAGESTAR HD USER GUIDE
Section 3: Configuration
I460GB issue 4
Page 49
Using the Identify Function
The Identify function causes the red source LEDs on the front of the
ImageStar HD
to flash briefly.
In a multi-processor system this can be used to help identify which device is which.
IMPORTANT
:
All current wall layout and clip settings will be cleared from the ImageStar HD.
These settings will need to be reapplied following use of the Identify function.
In the
Network
window, click the
Local Name
of the required device.
Click the
Network
menu and choose
Identify
.
The red source LEDs on the front of the corresponding
ImageStar HD
will switch to input 1
(for 3 seconds) then to input 2 (for 3 seconds) and finally back to input 1.
