28
29
* Certain models only.
English
Cleaning the hose and nozzle
The vacuum cleaner stops automatically if the nozzle,
tube, hose or filters become blocked and when the dust
container is full. In such cases, disconnect from mains and
allow to cool for 20-30 minutes. Clear blockage and/or
replace filters, empty the dust container and restart.
Tubes and hoses
38 Use a cleaning strip or similar to clear the tubes and
hose.
39 The hose handle can be dismantled from the hose if
cleaning is required.
40 It may also be possible to remove the obstruction in
the hose by squeezing it. However, be careful in case
the obstruction is caused by glass or needles caught
inside the hose.
Note: The warranty does not cover damage caused to the
hose while cleaning it.
Cleaning the floor nozzle
41 Be sure to frequently clean the combination floor
nozzle.
42* Press each wheel-hub and pull away the wheels.
Remove dust-balls, hair or other entangled objects.
43* Larger objects can be accessed by removing the
connection tube from the nozzle.
Cleaning the turbo nozzle*
44 Disconnect the nozzle from the vacuum cleaner tube
and remove entangled threads, etc. by snipping them
away with scissors. Use the hose handle to clean the
nozzle.
45 In case the turbo nozzle stops working, open the
cleaning lid and remove any objects that obstructs
the turbine to rotate freely.
ELX10223_Accelerator_Asian.indd 29
2007-01-23 15:27:21
