30
31
English
Troubleshooting
The vacuum cleaner does not start
• Check that the cable is connected to the mains.
• Check that the plug and cable are not damaged.
• Check for a blown fuse.
The vacuum cleaner stops
• Check whether the dust container is full. If so, empty it.
• Is the nozzle, tube or hose blocked?
• Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an authorised
Electrolux service centre. Damage to the motor caused by
the penetration of water is not covered by the warranty.
Consumer information
Electrolux decline all responsibility for all damages arising
from any improper use of the appliance or in cases of
tampering with the appliance.
This product is designed with the environment in mind.
All plastic parts are marked for recycling purposes. For
details see our web site: www.electrolux.com
If you have any comments on the cleaner or the
Instructions for Use booklet please e-mail us at:
[email protected]
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or a similarly qualified
person to avoid danger.
This product meets the requirements for CE marking
according to:
Low Voltage directive 73/23/EEC, 93/68/EEC
EMC directive 89/336/EEC
ELX10223_Accelerator_Asian.indd 31
2007-01-23 15:27:21
