20
21
Before starting
11 Push the release buttons at the front of the vacuum
cleaner and fold up the front lid.
12 Lift the dust container out and check that the motor
filter is in place.
13* Open the lid at the back of the machine and check
that the exhaust filter is in place.
14* Remove the upper cover of the dust container by
releasing the filter button. Remove the pre-filter by
pulling it upwards and check that the cylindrical Hepa
filter is in place (see 33). Put the pre-filter and upper
cover back and place the dust container back into
the cleaner.
15 Insert the hose until the catches click to engage
(press the catches to release the hose).
16 Attach the extension tubes* or telescopic tube* to
the hose handle and nozzle by pushing and twisting
together. (Twist and pull apart to dismantle.)
17 Extend the electric cable and connect it to the mains.
The vacuum cleaner is fitted with a cable winder.
Once the electric cable has been extended, it stays in
that position.
18 To rewind the cable, press the cord rewinder pedal.
The cable will then rewind.
19a Start the vacuum cleaner by pressing the power
button. Stop the vacuum cleaner by pressing once
again.
19b* Suction power can be adjusted by using the suction
control on the hose handle.
20 Ideal parking position for pausing (20a) and storage
(20b).
English
* Certain models only.
ELX10223_Accelerator_Asian.indd 21
2007-01-23 15:27:20