S E T U P
M E N U
O P T I O N S
73
x
Code 1
– disc player remote code is set to 1. This is the default remote code.
x
Code 2
– disc player remote code is set to 2. Use this code if you have other
products placed close to the
PBD 1
.
x
Code 3
– disc player remote code is set to 3. Use this code if you have other
Electrocompaniet
products placed close to the
PBD 1
.
x
Alt. Code
– Alternative remote code. The alternative remote control code enables users to
program their universal remote controls that come with TV, projector or A/V receiver to
operate the
PBD 1
player. If the universal remote control has a DVD player control function,
please program it with the code for Toshiba, Philips, Magnavox, Marantz or Zenith DVD
players. Since each brand of remote control may have several sets of codes, you may need
to try several times using different codes to find a working code.
If you have selected a new remote code, you must set the remote control handset to use the same code.
Please refer to the
Changing the Remote Code
section on page 10 of this manual for details. If you have
selected
Alt. Code
, the supplied handset will not operate the player, and you must use a universal remote
control with the properly configured code set.
5.
HDMI CEC
: Allows you to set the HDMI Consumer Electronics Control (CEC) mode. CEC is an
optional HDMI feature that enables convenient remote control and automatic setup of consumer
electronics over the HDMI connection. The remote control function allows you to use a single remote
handset to operate multiple devices connected via HDMI. For example, you may use the TV remote
to control playback of the Blu-ray Disc player. The automatic setup function can automatically turn on
the TV and change to the proper input when you start playing a disc in the Blu-ray Disc player. It can
also turn off the player automatically when you turn off the TV. The implementation and compatibility
of this feature varies by device manufacturer. Each may only implement part of the features or add
their own proprietary functions. The manufacturer-specific implementation of the HDMI CEC function
is often given a proprietary name of “…Link” or “…Sync”. The
Electrocompaniet
provides three
HDMI CEC
function modes for each of its HDMI outputs:
x
HDMI 1
– HDMI CEC is enabled on HDMI 1 output. Use this mode if your other devices are
compatible with the player.
x
HDMI 1 (Limited)
– HDMI CEC is enabled on HDMI 1 output, but the
PBD 1
will only
respond to playback control commands. It will not respond or issue power on/off and input
selection commands. Use this mode if you do not want the automatic setup function to turn
on/off your devices.
x
HDMI 2
– HDMI CEC is enabled on HDMI 2 output. Similar to
HDMI 1
.
x
HDMI 2 (Limited)
– HDMI CEC is enabled on HDMI 2 output, but the
PBD 1
will only
respond to playback control commands. Similar to
HDMI 1 (Limited)
.
x
x
Off
(default) – HDMI CEC feature is turned off on both HDMI output terminals. The player will
not respond to HDMI CEC commands from other devices, nor will it setup other devices
automatically.
6.
Standby Mode
: Allows you to choose between two standby modes. In
Energy Efficient
mode, the
player consumes a minimal amount of power but takes more time to get ready for operation after
being turned on. In
Quick Start
mode, the player can start up significantly faster at the expense of
additional power consumption during the standby period.
Energy Efficient
(default) – The player will take slightly longer to start up, but will
consume less power in standby mode. This mode is recommended for regular use.
