USER MANUAL ELDES ESIM252 V1.0
13
To enable this function send the following SMS message:
To disable this function send the following SMS message:
If you want to configure SMS message delivery only for particular users or only for particular inputs, please, refer to chapter 3.9 or
use configuration program
ELDES Configuration Tool
.
3.8 Calling all users
During the alarm, Esim252 system starts calling NR1. If the call to NR1 was unsuccessful or the subscriber was out of network co-
verage the call is forwarded to NR2 etc. If the user rejected the call or answered te call during the alarm the system stops calling.
However, you can set the system to call all users entered in the system regardless of the fact whether the user answered or rejected
the call, was out of network coverage or was engaged.
To turn on this feature send the following SMS message:
ATTENTION!
When this feature is enabled it will not be possible to stop calling the next user in the sequence even if the call is answered.
To disable this function send the following SMS message:
If you want to configure calling only to particular users or only for particular zones, refer to chapter 3.9 or use configuration program
ELDES Configuration Tool.
3.9 Configuration for advanced users
All features described in chapter 3.9 of the user manual can be configured using “ELDES Configuration Tool“ software. In
case if there is no possibility of connecting the device to the computer via USB or if you want to change the settings remotely you
can do this via remote configuration feature over GPRS using “ELDES Configuration Tool“ or via SMS messages. We recommend
changing the settings by SMS only for advanced users.
XXXX_SMSALL:ON
XXXX_SMSALL:OFF
XXXX_CALLALL:ON
XXXX_CALLALL:OFF
Summary of Contents for ESIM252
Page 1: ...GSM CONTROL SYSTEM ESIM252 ...
Page 33: ...USER MANUAL ELDES ESIM252 V1 0 33 ...
Page 34: ...34 For notes ...
