USER MANUAL ELDES ESIM252 V1.0
21
FOR ADVANCED USERS
All these features can be configured using program “ELDES Configuration Tool“
As per factory default settings SMS message sending feature in the case of alarm is enabled for all users until the first successful
delivery of the SMS message and calling in the case of alarm is enabled for all users until the first answered call, calling feature in the
case of alarm must be disabled for users NO1 and NO2. Mandatory SMS delivery to all users must also be enabled.
a) First of all a flood sensor is connected to Esim252 input Z1.
b) The following configuration SMS messages must be sent to Esim252 system:
where SMSALL enables mandatory SMS message delivery feature for all users.
where CC12 means that alarm call feature is disabled for users NO1, NO2 after input Z1 violation.
We make an assumption that users NO3-NO5 were not preset in the system at all.
Task No2:
Configuring the system so that users (NO1) and (NO2) receive SMS message about a burst water pipe (flood) at home. SMS mes-
sages must be delivered to both users.
ESIM151
Alarm
SMS
Alarm
SMS
User
NO1
User
NO2
Flood detector
Heating
Controller
XXXX_SMSALL:ON
XXXX_SMSEXTRA:Z1:CC12
Summary of Contents for ESIM252
Page 1: ...GSM CONTROL SYSTEM ESIM252 ...
Page 33: ...USER MANUAL ELDES ESIM252 V1 0 33 ...
Page 34: ...34 For notes ...
