35
3. Next remove the back cover. First, remove the cover on the water container and coffee
container. Remove the round plastic filter holder on the end of the water tube and slide
the tube out of the opening in the cover, remembering first to use a felt-tipped pen to
mark the position of the tube in the water container so that it can be replaced in the same
position. This is important as you will see later. Place both covers to one side. Observe
the following photos:
Photo 3/1
Photo 3/2
Photo 3/3
Photo 3/4
4.
The water container mounting now needs to be disassembled. To do this, the
stops on the thin side walls for the front dividing panel must be pushed as far
back as possible so that the mounting can be pushed up to the top and removed.
The base of the mounting is sprung. So please be careful that this spring is not
lost. When re-assembling the mounting, position the base horizontally and
reinsert the side plates in the corresponding >>slots << . (See the following
photos)
Summary of Contents for SUPREME DED400XP1
Page 1: ...EXPRESSO DED400XP1 ...