43
that sufficient water is forced out of the taps. To be checked:
(Caution: this should only be carried out by a service engineer if
required during servicing!!!) The movement required is like that for
coffee or water servicing, pull out the machine (lift up and pull
forward) and on the left-hand side, behind, manually activate the
safety switch so that the machine is electrified. Next, (place a
container under the water taps!). Press the top left pad (brew coffee)
and look into the back section between the blue water cover and the
entry hole and check whether water is flowing. See photo! Carefully
jiggle the tube left and right to eliminate any kinks that might be
along the tube (which cannot be seen because it is behind the casing).
Safety Advice for Service Engineers
Caution: Before commencing any work on the appliance, it should be “disconnected”
from the electricity supply. This can be done by:
either removing the appliance plug from the mains socket or by isolating electricity
supply to socket through safety circuit-breaker or by turning off electricity completely
at mains switch.
Caution: For the purpose of simply carrying out testing and checking of the machine,
the Service Engineer may leave the machine connected to the mains power supply when
there the approved electrical safety breaker device installed at the back, in the left-hand
bottom corner of the machine (that cuts out power supply in all directions between
appliance socket and appliance electrical circuit) is manually activated and cuts out
mains power to the machine.
As an authorised Service Engineer, you should comply with all European testing
standards and the relevant safety regulations for electrical appliances, in order not to
endanger yourself or other people and to prevent any other kind of hazards and risks.
Summary of Contents for SUPREME DED400XP1
Page 1: ...EXPRESSO DED400XP1 ...