EKOM 447000001-066, User Manual

Page: 42 / 72

OPERATION
NP-DK50-9x4VRTM-AD-EN-5_04-2022 42 04/2022
Equipment operation
Normal operating mode is shown when the
equipment is operating and the functional and
control buttons are used to browse through
the following:
Pressing F2:
SECTION_A - operating hours of section A /
M1 /
SECTION_B - operating hours of section A /
M2 /
SECTION_C - operating hours of section A /
M7 /
AVERAGE
HRS - operating hours
averaged.
TIME
–TO –GO MN - time to next
maintenance/service
TOTAL
HOURS: - total compressor
operating hours
NUMBER of MN
– number of completed
maintenance (service) checks confirmed
using the F4 button
The screen automatically returns to the
home screen after 10 seconds.
Pressing F3:
This permits browsing through different
auxiliary screens. E.g. displays the number
of overload faults for motors M1 to M9
(motor circuit breaker disconnects the motor
from power). The circuit breakers must be
manually turned to the ON position to
remedy the malfunction.
The screen automatically returns to the
home screen after 10 seconds.