EKOM 447000001-066, User Manual

Page: 8 / 72

IMPORTANT INFORMATION
NP-DK50-9x4VRTM-AD-EN-5_04-2022 8 04/2022
frequency stated on the product are
the same as the power mains.
•
Check for possible damage to the
product and the connected air
distribution system before use.
Replace damaged pneumatic and
electrical conductors immediately.
•
Immediately disconnect the product
from the mains in hazardous
situations or when a technical
malfunction occurs.
•
During repairs and maintenance,
ensure that:
- product is disconnected from the
mains
- pressure is released from all lines
•
Only the manufacturer, or a qualified
specialist trained by the manufacturer
may install, modify or upgrade the
product itself.
•
Only a qualified electrician may install
electrical components!
6. STORAGE AND TRANSPORT CONDITIONS
The compressor is shipped from the
manufacturer in transport packaging. This
protects the product from damage during
transport.
Potential for damage to
pneumatic components.
The compressor must be
transported only when all air has
been vented. Before moving or
transporting
the compressor,
release all the air pressure from
the tank and pressure hoses,
from dryer chambers and drain
condensate from the tank and
from the condensate separator
on the dryer.
Keep the original factory
packaging in case the device
needs to be returned Use the
original factory packaging during
transport as it provides optimum
protection for the product. . If it is
necessary to return the product
during the warranty period, the
manufacturer is not liable for
damages caused by improper
packaging.
The compressor is shipped in a
vertical position and must be
secured using transport straps.
Protect the compressor from humid
and dirty environments and extreme
temperatures during transport and
storage. Do not store near any
volatile chemical substances.
If not, please dispose of the original
packaging
material in an
environmentally-friendly way. The
packaging
cardboard can be
recycled with old paper.
Storing or shipping the equipment in
any conditions other than those
specified below is prohibited.
6.1. Ambient conditions
Products may only be stored and transported in vehicles that are free of any traces of volatile
chemicals under the following climactic conditions:
Temperature
–25°C to +55°C, 24 h at up to +70°C
Relative humidity max. 90% (non-condensing)