TROUBLESHOOTING
04/2022
65
NP-DK50-9x4VRTM-AD-EN-5_04-2022
at least 1 hour
Check the moisture content of
the air exiting the air tank (see
the Technical data chapter) to
prevent damage to connected
downstream equipment.
19. REPAIR SERVICE
Warranty and post-warranty repairs must be
done by the manufacturer, its authorized
representative,
or
service
personnel
approved by the supplier.
Attention.
The manufacturer reserves the right to make
changes to the equipment without notice. Any
changes made will not affect the functional
properties of the equipment.
20. LONG-TERM SHUTDOW
If the compressor will not be used for a
prolonged time period, it is recommended to
drain all condensate from the air tank and the
condensate separator. Then turn on the
compressor for 10 minutes, keeping the drain
valve on the air tank open (15) (Fig. 1).
Switch off the compressor using the main
switch (19) (Fig. 2), close the condensate
drain valve and disconnect the equipment
from the mains.
21. DISPOSAL OF DEVICE
•
Disconnect the equipment from the
mains.
•
Release the air pressure in the
pressure tank by opening the drain
valve (15) (Fig. 1).
•
Dispose of the equipment following all
applicable regulations.
•
Entrust a specialised company to sort
and dispose of waste.
•
Worn out components have no
negative environmental impact.
Summary of Contents for 447000001-066
