IMPORTANT INFORMATION
04/2022
7
NP-DK50-9x4VRTM-AD-EN-5_04-2022
damages originating from the use of
accessories or consumables other
than those specified or suggested by
the manufacturer.
•
The manufacturer only guarantees the
safety, reliability and function of the
equipment if:
-
Installation, new settings, changes,
modifications
and
repairs
are
performed by the manufacturer or its
representative, or a service provider
authorized by the manufacturer..
-
The product is used pursuant to the
user manual.
•
The user manual corresponds to the
configuration of the product and its
compliance with applicable safety and
technical standards at the time of its
printing. The manufacturer reserves
all rights for the protection of its
configuration, methods and names.
•
Translation of the user manual is
performed in accordance with the best
available knowledge. The Slovak
version is to be used in the event of
any uncertainties.
5.2.
General safety warnings
The
manufacturer
designed
and
manufactured the product to minimise all
risks when used correctly for the intended
purpose. The manufacturer considers it
responsible for specifying the following
general safety precautions.
•
Use and operation of the product must
comply with all local codes and
regulations. The operator and user
are responsible for following all
appropriate regulations in the interests
of performing work safely.
•
Only the use of original parts
guarantees the safety of operating
personnel and reliable operation of
the
product
itself.
Only
use
accessories and parts mentioned in
the
technical
documentation
or
expressly
approved
by
the
manufacturer.
•
The manufacturer assumes no liability
for any damages or other risks if any
accessories or parts other than
mentioned
in
the
technical
documentation or expressly approved
by the manufacturer are used. This
warranty does not cover damages
originating
from
the
use
of
accessories or consumables other
than those specified or suggested by
the manufacturer.
•
The user must make sure that the
equipment is functioning correctly and
safely every time it is used.
•
The user / operator must be capable
of safely using and properly operating
the product. The user must be trained
to operate the product and must be
experienced.
•
Create operating regulations for the
person operating the product.
•
Wear hearing protection when starting
the product, during operation and any
time it is in operation.
•
Operating the product in operating
premises that may contain mixtures of
flammable gases such as operating
rooms or in areas that may contain
explosive mixtures of particulate, such
as coal dust, is prohibited.
•
Flammable
materials
pose
an
explosion hazard!
•
Use of the product in wet or damp
environments is prohibited.
•
The user shall inform the supplier
immediately if any problem occurs in
direct connection with the operation of
the equipment.
•
Any serious incident that has occurred
in relation to the device should be
reported to the manufacturer and the
competent authority of the Member
State in which the user and / or
patient is established.
5.3.
Electrical system safety
warnings
•
The
equipment
may
only
be
connected to a properly installed
socket connected to earth (grounded).
•
Before the product is plugged in,
make sure that the mains voltage and
Summary of Contents for 447000001-066
