Operating instructions ekamove Rev 3 Date: June 2017 32
14 Freely programmable programme
With ekamove® you have the option of responding to the individual
positioning needs of the person requiring care. To do this, the
“L-N-
R P5” programme can be adjusted individually for each partial
positioning stage. For example, you can select a different angle for
each side position. Also the positioning time can be adjusted
separately for each partial positioning stage. So, for example, if
you have a person requiring care who has decubitus ulcers on the
right trochanter and in the region of the coccyx and you want to
protect these affected parts of the body, then you can programme
the following setting for example:
Left side 30° with a positioning time of 2 hours, supine position 30
minutes and right side 10 ° and 20 minutes.
In order to enter the individual settings for the relevant partial
positioning stage, you should select the “L-N-R P5” programme. If
you hold down the “Prog” key, the left-hand display side starts to
flash the L.
On systems with sensors, press and hold the “Angle” key and the
angle display will appear in the right-hand display side. You can
now change this to the required value by activating the “Plus” (+) or
“Minus” (-) keys. The value adjusted will be adopted immediately.
Note: when starting the system you should check that there is no
air in the air chamber system. If there is any air remaining in the
chamber system, this can be emptied by holding down the Stop
key.
In manual mode, you can set the filling time for this side. The filling
time can be set to between 1 and 7 minutes. Here 1 minute