Operating instructions ekamove Rev 3 Date: June 2017 39
21 Warning messages
If the corresponding angle or position is not achieved within 10
minutes, an acoustic warning signal sounds and the apparatus
goes into error mode (see Malfunctions/Error messages). Before
starting the programme again you should calibrate the sensors
(see section on Calibrating the sensors).
If, during operation, the apparatus should be disconnected from the
power supply or if there is a power failure, an acoustic warning
signal sounds for approx. 5 minutes.
The warning signal can be shut off by pressing the “STOP” key.
You will then need to restart it!
