Operating instructions ekamove Rev 3 Date: June 2017 21
8.3 Connecting air chamber, sensors and control
unit
The connection of the air chamber is done by means of quick-fitting
couplings. To do this, please plug the hose of the air chamber
system marked with an R to the right-hand connection on the
apparatus. Then plug the hose of the air chamber system marked
with an L to the left-hand connection on the apparatus. In both
cases you will hear a clear click when the coupling are in place.
For apparatus with sensor monitoring (optional) the sensor is to be
plugged into the socket on the apparatus. Here the white marking
on the plug points to the front of the control unit.
Any cable should be laid so that it does not present any accident
hazard and also so that unintentional disconnection is avoided.
8.4 Connection with the mains supply
There is a 5 metre long power line on the apparatus. Please lay
this power line so that it does not present any accident hazard.
Also the power line should not be damaged or pinched in any way.
The power plug is connected to the mains socket (please note:
only use mains sockets with corresponding protective earth
conductors)
The ekamove® is now ready for operation!
Left air connection
Right air connection
Sensor connection
Power connection/line
