10
11
Part names and functions
Front
Back
Bottom
①
Lamp cover
②
Lens shift ring
③
Top
control panel and indicator
④
Filter
⑤
Projector lens
⑥
Remote control receiver (front)
⑦
AC cord connector
⑧
Speaker
⑨
Terminals
⑩
Remote control receiver(back)
⑪
Kensington Security Slot
⑫
Adjustable foot
⑬
Exhaust vent
⑨
①
②
④
⑤
③
⑥
⑧
⑩⑪
⑫
Caution
Hot air is exhausted from the exhaust
vent. Do not put heat-sensitive
objects near this side.
Part names and functions
Terminals
① ②
③
④
⑤ ⑥ ⑦
⑬
⑭
⑫
⑪
⑩
⑨
⑧
①
AUDIO OUT
Connect external audio amplifier to this jack.
②
MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
③
VIDEO IN
This is the terminal to input video signals.
④
VGA IN 2/VGA OUT
- Connect a computer output to this terminal.
- Output the analog signal form
②
to other
monitor.
⑤
HDMI / MHL
This is the terminal to input the HDMI or MHL
signals.
⑥
HDMI
This is the terminal to input HDMI signals.
⑦
USB-A
When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.(Refer to Page 52)
⑧
USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.(Refer to Page 64)
⑨
LAN
- This is the LAN terminal to connect to the
network.
- Connect the projector to the computer via
RJ45 cable when you use the "Network"
Display function.
⑩
AUDIO IN
This is the terminal to input computer audio
signals.
⑪
RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑫
VGA IN 1/YPbPr/S-VIDEO IN
This is the terminal to input RGB, YPbPr or
S-video signals.
⑬
Remote Control receiver(BACK)
Operation the projector by remote control.
⑭
Kensington Security Slot
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
⑦
Note:
● Kensington Security Slot is for a
Kensington lock used to deter theft of
the projector.
● Kensington is a registered trademark
of ACCO Brands Corporation.
⑬
