300631 • 1/2018 • H.S.
35 of 82
4 Installation
Installation and Operating Instructions
High Pressure Cleaner, Hot Water, Stationary
HSC1140-INOX Gas
When assembling the Washing station equipment, make sure that the
individual parts are pressure-tight.
To install the wash station equipment, proceed as follows:
Connect the high pressure hose (example see 14, Fig. 4-3) with the
trigger gun (15, Fig. 4-3).
Connect the other high pressure hose adapter to the high pressure hose
connection of the high pressure cleaner.
Attach the high pressure nozzle (18, fig. 4-3) to the spray lance
(17, fig. 4-3).
4.10
Set up internal cleaning detergent container
WARNING
Only use approved detergents.
Only detergents approved by EHRLE may be used.
The use of inadmissible cleaning agents can impair the operational
safety of the high pressure cleaner. This may endanger life and limb of
persons.
General Information
The supply of chemicals and cleaning agents is controlled by standard
built-in solenoid valves. This prevents uncontrolled overflow of the
cleaning agent into the float container or back into the cleaning
detergent container.
Inside the cabinet, two plastic containers with a capacity of 25 l each can
be set up for the supply of detergent.
Place the two plastic containers inside the cabinet at the location provided
by the manufacturer (see Fig. 4 - 4).
