![EHRLE HSC1140-INOX Gas Installation And Operating Instructions Manual Download Page 13](http://html1.mh-extra.com/html/ehrle/hsc1140-inox-gas/hsc1140-inox-gas_installation-and-operating-instructions-manual_2368758013.webp)
300631 • 1/2018 • H.S.
13 of 82
2 Safety
Installation and Operating Instructions
High Pressure Cleaner, Hot Water, Stationary
HSC1140-INOX Gas
Information on hearing protection
If the sound levels exceed the permissible values, the personnel and
persons in the area of exposure must wear hearing protection.
The sound level for EHRLE high pressure cleaners under maximum load is
82 dB (A). A high sound level can cause hearing loss over a longer period
of time. If the noise produced by the application of the emerging high
pressure jet to noise-enhancing objects exceeds the permissible values,
the operating personnel and any persons affected must wear hearing
protection.
Do not operate the system if electrical lines or other safety-relevant parts
(pressure relief valve, high pressure hose, trigger gun, etc.) are defective.
2.4
Safety instructions for gas-fired systems
2.4.1
General information about the gas burner type
The High Pressure Cleaner, Hot Water, Stationary, HSC1140-INOX Gas is
equipped with a gas burner of the company
●
Weishaupt, gas burner type WG5
or
●
Baltur, gas burner type BPM90
The technical manual „Installation and Operating Instructions“ of
Weishaupt or Baltur is included in the scope of delivery of every gas-
heated stationary hot water high pressure cleaner and must be observed.
The gas-fired high pressure cleaners are subject to certification by the
DVGW (Deutscher Verein des Gas- und Wasserfaches).
The CE number is:
CE-0085AR0179
SVGW Certificate No.
09-034-8 SVGW/VKF