Efka DA320G5351, Connection Diagrams

Page: 19 / 38

EFKA DA320G5351
21
Technician Level
Code no. 190 with control operation
Code no. 1907 with control panel operation
Parameter Designation Unit Limits Preset for Ind.
max min 100
Ω
220
Ω
680
Ω
1000
Ω
133 LSE Thread trimming operation, when completing the 1 0 1 1 1 1 A
seam after light barrier sensing On/Off
134 SSt Softstart On/Off 1 0 1 1 1 1 A
135 SrS Ornamental backtack On/Off 1 0 0 0 0 0 A
136 FAr 0 = Trimming stitch forward and thread wiper 6 0 5 0 1 0 A
function On
1 = Trimming stitch backward and thread wiper
function On
2 = Trimming stitch forward with short trimmer
signal instead of a thread wiper
3 = No function
4 = No function
5 = Thread clamp with trimming stitch backward
6 = Thread clamp with trimming stitch forward
137 SLU Stitch length during backtack 1 0 1 1 0 0 A
0 = long stitches
1 = normal stitches
138 hPr 0 = High lift for walking foot 1 0 0 0 0 0 A
operational mode not stored
1 = High lift for walking foot
operational mode stored
139 nIS Display of machine speed On/Off 1 0 0 0 0 0 A
141 SGn Speed status for the seam with stitch counting 4 0 1 1 1 1 A
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 118) without
influence by the pedal (machine stop by
pressing the pedal to the basic position)
2 = Limited speed controllable by the pedal up to
the set limit (parameter 118)
3 = At fixed speed (parameter 118) can be
interrupted by full heelback
4 = At fixed speed (parameter 110) can be
interrupted by full heelback.
142 SFn Speed status for the free seam and for the seam 3 0 0 0 0 0 A
with light barrier
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 118) without
influence by the pedal (machine stop by
pressing the pedal to the basic position)
2 = Limited speed controllable by the pedal up to
the set limit (parameter 118)
3 = At fixed speed (parameter 118) can be
interrupted by full heelback
145 StL Normal/long stitches with/without speed limitation. 2 0 0 0 0 0 A
Key on input in1...i10 = 22.
0 = Normal/long stitches without speed limitation
1 = Normal/long stitches with speed limitation
(DB2000)
2 = Normal/long stitches with speed limitation
(DB3000)
150 t8 Stitch correction of the double start ms 500 0 0 0 0 0 A
backtack (prolongation of the stitch
regulator ON period / not effective with
ornamental backtack)
151 t9 Stitch correction of the double end ms 500 0 0 0 0 0 A
backtack (prolongation of the stitch
regulator ON period / not effective with
ornamental backtack)
152 thP Run-out time of the high lift walking speed ms 500 80 100 100 100 100 A