Efka DA320G5351, Connection Diagrams

Page: 23 / 38

EFKA DA320G5351
25
5.3 Supplier Level
Code no. 311 with control operation
Code no. 3112 with control panel operation
Parameter Designation Unit Limits Preset for Ind.
max min 100
Ω
220
Ω
680
Ω
1000
Ω
200 t1 Delay until speed release after start ms 500 0 50 50 50 50 A
backtack
201 t2 Sewing foot lift switch-on delay with half ms 500 20 80 80 80 80 A
heelback
202 t3 Start delay after disabling the sewing foot ms 500 0 80 80 120 80 A
lift signal
203 t4 Time of full power of sewing foot lifting ms 600 0 200 200 200 200 A
204 t5 Holding power for sewing foot lifting % pa. 298 1 40 40 40 40 A
1...100%
1% low holding power
100% high holding power
205 t6 Thread wiper time ms 2550 0 100 100 100 100 A**)
206 t7 Delay from end of thread wiper until ms 800 0 50 50 30 30 A
sewing foot lifting On
207 br1 Braking effect when modifying the preset value 55 1 20 20 20 20 A
≤ 4 stages
208 br2 Braking effect when modifying the preset value 55 1 30 30 30 30 A
≥ 5 stages
210 tSr Stop time for switching the stitch regulator ms 500 0 100 270 150 100 A
in the ornamental backtack
212 t10 Time of full power of backtacking ms 600 0 200 200 200 200 A
213 t11 Holding power for backtacking 1...100% % pa. 299 1 50 50 50 50 A
1% low holding power
100% high holding power
215 Zrv 0 = Last counted forward section in the start 1 0 1 1 1 1 A
backtack OFF
1 = Last counted forward section in the start
backtack ON
216 FLS 0 = Fast disabling of sewing foot lift OFF 1 0 1 1 1 1 A
1 = Fast disabling of sewing foot lift ON
219 br3 Positioning power at stop of the drive 55 1 10 10 10 10 A
220 ALF Accelerating power of the drive 55 1 20 20 20 20 A
221 dGn Speed gate 1 RPM 990 50 100 100 100 100 A
222 tGn Speed gate damping period ms 990 0 120 120 120 120 A
223 dG2 Speed gate 2 RPM 6000 200 1300 1600 1600 1600 A**)
224 dGF Speed gate 2 On/Off 1 0 1 1 1 1 A
240 in1 Selection of the input functions on socket A/7 69 0 13 13 13 13 A
for input 1
0 = No function
1 = Needle up/down
2 = Needle up
3 = Single stitch (basting stitch)
4 = Full stitch
5 = Needle to position 2
6 = Machine run blockage effective with open
contact
7 = Machine run blockage effective with closed
contact
8 = Machine run blockage unpositioned effective
with open contact
9 = Machine run blockage unpositioned effective
with closed contact
10 = Automatic speed n12 without pedal
11 = Limited speed n12 pedal controlled
**) When programming the 3-digit or 4-digit control parameter values (without control panel), the 2-digit or 3-digit
value displayed must be multiplied by 10.