Effekta AX M2 Series, User Manual

Page: 9 / 132

Innovating power.
AX M2 series 3-5 kW | Solar inverter
Solar inverter | V1.7 Safety – Page 9
1.3 General safety instructions
General accident prevention measures
▪
Adhere to the current safety regulations of your plant.
▪
Never remove covers, safety equipment or other components from
the solar inverter!
▪
Report defects and irregularities immediately to the responsible persons!
User Manual
▪
Read the User Manual before working with the solar inverter.
▪
Always refer to the complete original version of this User Manual. Incomplete
versions or copies of individual pages do not convey all the information from the
User Manual.
▪
Observe the safety instructions and danger indications in this User Manual.
Operating personnel
▪
It is only permissible that the installation and connection of the solar inverter is
performed by trained electricians in accordance with the corresponding safety
regulations, standards and the domestic guidelines!
▪
The solar inverter can be operated by persons without prior experience.
▪
Ensure that the location of the solar inverter is sufficiently illuminated.
▪
Permissible operation and environmental conditions
▪
The solar inverter can only be assembled on stable and weight-bearing walls (e.g.
cement, brick).
▪
The device may only be installed on a clean, dust-free and dry site.
▪
The solar inverter must be installed in a well-ventilated environment, far from water,
inflammable gases and corrosive agents.
▪
In any case, it must be ensured that the installation site has sufficient air circulation
for the cooling of the device.
▪
Mind the distances between several solar inverters and that other devices located
in the immediate vicinity do not negatively influence the solar inverters (e.g. strong
waste heat).
▪
The solar inverter is only permitted to be operated in interior rooms. It is not
intended for use in dusty or corrosive environments or in explosive atmospheres.