Effekta AX M2 Series, User Manual

Page: 59 / 132

Innovating power.
Connection - Page 59
Solar inverter | V1.7
9 Connection
9.1 Safety instructions
Risk of injury!
To avoid electrical hazards, connection of the device should only occur in a de-
energized state.
All the wiring must be carried out by qualified personnel. The 5-point rule should
always be observed here:

Enable the unit and connections ;

Secure all engaged sources and devices against unauthorized restarting;

Check all connections for zero voltage;

If necessary, ground or short circuit parts;

Cover or shut off neighboring energized parts;
▪
Before using the device, read all the instructions and warnings pertaining to the
device and batteries as well as all relevant sections of the User Manual.
▪
To reduce the risk of injury, only charge rechargeable lead-acid batteries. Other
types of batteries can explode and cause injury and damage.
▪ Do not disassemble the device. Bring it to a qualified customer service center if
maintenance or repairs are necessary. Incorrect assembly can led to risk of
electrical shock or fire.
▪
Only qualified persons are permitted to install batteries in this device.
▪
NEVER charge a frozen battery.
▪
Fuses are intended as overcurrent protection for the battery supply.
▪
This inverter/charging device should be connected to a permanently grounded
wiring system. It is important to observe the local requirements and regulations for
the installation of this inverter.
▪
NEVER short circuit the AC output and the DC input. Do NOT connect the device to
the power supply if the DC input has been shorted.
WARNING