manualshive.com logo in svg

EFD Ultra 325TT, User Manual, Page: 58 / 79

Share
Download
EFD Ultra 325TT User Manual Download Page 58

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

58

8

ACCESSORIES

Part Number

Description

Comments

1117HTT

Barrel Pressure Regulator Kit

2000F755TT

Five micron Filter Regulator

2000F756TT

Five micron Filter Regulator with
coalescing filter

756FLT

Coalescing Filter Assembly

7007-300

Universal Fixture Plate, 300 mm x 300 mm

For use with the Ultra TT 325TT. Includes
4 x 700703 (edge locators) and 1 set of 
700806 (fixture plate standoffs).

7007-500

Universal Fixture Plate, 500 mm x 500 mm

For use with the Ultra TT 525TT. Includes
4 x 700703 (edge locators) and 1 set of 
700806 (fixture plate standoffs).

700703

Edge Locator

Four included with each EFD Universal 
Fixture Plate.

700801

TT Fixture Locator

To ensure valve/barrel mounting fixture is 
mounted at the same spot all the time.
Note that this is included in each Mounting 
Fixture (700802-700814).

700802

TT Mounting Fixture – 750 Series

700803

TT Mounting Fixture – 740/780 Series

700804

TT Mounting Fixture – 725 Series

700805

TT Mounting Fixture – 725HF/736 Series

700806

TT Mounting Fixture – 790 Series

700807

TT Mounting Fixture – HP7x

700808

TT Mounting Fixture – HP4x

700809

TT Mounting Fixture – 5800MP (Mikros)

700810

TT Mounting Fixture – Cartridge

700811

TT Mounting Fixture – 1/10G Cartridge

700812

TT Angled Fixture Mount

700814

TT Universal Barrel Mount

For use with EFD syringe barrels of all sizes

700815

TT Regulator Mounting Bracket

Attaches a regulator onto the system’s
T-slots

700817-T3

Teach Pendant, Tungsten T3

Use as Teach Pendant

700818

Teach Pendant Cable

Connects PDA handheld to the Ultra TT 
System

700819

Fixture Plate Standoffs, Set of 4

Vertical props for the 

700840

Two-barrel Mounting Kit

700841

Three-barrel Mounting Kit

700842

Two-valve Mounting Kit

For 740, 750 and 780 Series valves only

700843

Three-valve Mounting Kit

For 740, 750 and 780 Series valve only.

700844

Dual-auger Valve Mounting Kit

For mounting two 790 Series Auger valves

700845

Triple-auger Valve Mounting Kit

For mounting three 790 Series Auger valves

700846

TT Mounting Fixture - 2800

Summary of Contents for Ultra 325TT
















































































Reviews:

No comments