manualshive.com logo in svg

EFD Ultra 325TT, User Manual, Page: 12 / 79

Share
Download
EFD Ultra 325TT User Manual Download Page 12

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

SHIPPING CONTENTS

Your System is shipped with the following:

(1)

Ultra TT Automation Series system

(2)

Power cords; one for 110VAC, one for 230VAC

(1)

Z-head counter-balance spring

3

(1)

User Operation 

& PDA Software CD Rom

(1)

Quick Start Installation Guide, Warranty Card, Complaint Card

(1)

Socket

™

Cordless Bluetooth

®

Adapter

(1)

Palm handheld

4

(may be shipped separately)

(1)

Calibration Restoration mini-disk (adhered to the back of the X-cover)

Other EFD mounting and dispensing equipment, and accessories may also be included.

Note:

In order to program and operate your Ultra TT automation system, you will need the 
following in addition to the above:

•

Tooling plate

•

EFD dispensing valve/syringe barrel

•

Corresponding EFD valve/syringe barrel custom mounting bracket 

WARRANTY

Your warranty information and return policy guideline is included in your shipment. Be sure to
register your warranty within 30 days of your purchase. You can also register your warranty online
through 

http://www.efd-inc.com/warranty/xyz

. 

Only registered users are eligible and notified of

free upgrades

.

Note that the Palm

™

handheld is not covered under the EFD Ultra TT warranty program. Please be

sure to return the warranty card that accompanied your Palm handheld to Palm Corporation.

Within the period of the warranty, EFD will repair or replace any defective component, or the entire
system at EFD’s option, on authorized return of the part or complete system prepaid to the factory.

In no event shall any liability or obligation of EFD arising from this warranty exceed the purchase
price of the equipment. Before using, user shall determine the suitability of the product for his
intended use, and user assumes all risk and liability whatsoever in connection therewith. This
warranty is valid only when clean, dry, filtered air is used.

EFD makes no warranty of merchantability or fitness for a particular purpose. In no event shall EFD
be liable for incidental or consequential damages

.

12

3

If the Z-axis needs to hold more than 3kg, then a second spring will be required. The Ultra TT System 

comes standard with only one spring installed.

4

User may also use their own PDA handheld, Palm OS 4.0 or higher, Bluetooth compatible.

Summary of Contents for Ultra 325TT
















































































Reviews:

No comments