®
A NORDSON COMPANY
Ultra TT User's Guide
Version 1.2
4
SYSTEM CONFIGURATION
After performing the discovery and pairing of the PDA and the Ultra TT (Section 3), go into the
Setup screens to configure your Ultra TT system for the specific valve/syringe barrel setup
appropriate for your fluid dispensing application. You have to complete this setup first or you will
not be able to program the dispensing pattern correctly.
From the Main screen, tap “Setup”. This will take you into the Setup screen. If this is the first time
you are accessing the software since powering up, a message informing you that the dispenser is
“about to home”. Tap “OK” to continue.
There are a total seven (7) Setup screens:
1. Valves
2. Units
3. Height Sensor
4. Park Location
5. Purge Valve #1
6. Purge Toggle
7. Safe Z
4.1
VALVE SELECTION
28
First, make the Valve Bracket selection i.e. Single, Dual, Triple or Toggle.
When using dual or triple valves, you are required to mechanically align the secondary and tertiary
valves to your parts.
Allows operator to
navigate forward or
backward between
setup screens
Allows operator to
select a specific
setup screen from
a pull-down menu