EE Brightbox User Manual Download Page 48 | Manualshive

Page: 48 / 207

EE Brightbox User Manual Download Page 48

EE Bright Box User Manual

48

Set-Up > UPnP page.

Gateway

This field displays the gateway IP address for the routers
local area network (LAN). This IP address is the same as
you use to login to the Bright Box admin pages, and is
‘192.168.1.1’ by default.
The value can be configured on the Advanced Set-Up >
DHCP page.

Subnet Mask

This field displays the subnet mask for the routers local
area network (LAN). The value of this field is
‘255.255.255.0’ by default.
The value can be configured on the Advanced Set-Up >
DHCP page.

DHCP Server

This field displays the status of the router’s Dynamic Host
Control Protocol (DHCP). The value is ‘Enabled’ by default,
meaning that LAN IP addresses are automatically
allocated to client devices connecting to the router. If the
value is ‘Disabled’ then client devices must supply their
own LAN IP addresses in order to connect to the router.
The setting can be configured on the Advanced Set-Up
> DHCP page.

«
...
46
47
48
49
50
...
»

Summary of Contents for Brightbox
















































































































































































































Reviews:

No comments