EE Brightbox User Manual Download Page 12

Page: 12 / 207

EE Bright Box User Manual

•

DSL port

•

Reset button

•

Ethernet Ports

WAN port for Fibre broadband services (also known as LAN 4)

LAN ports (1-4)

•

USB port

•

ON/OFF power switch

•

Power socket

•

WPS button

The table below describes the ports, sockets and buttons on the back panel of the Bright Box
router:

Item

Description

DSL port

For ADSL broadband, connect one end of a broadband
cable (RJ-11) to this port and the other end to a filter and
the telephone line.

Reset button

Press briefly to restart the router, or press for 6 seconds to
return the router to factory default settings.

WAN port

For ADSL broadband, connect one end of an Ethernet
cable (RJ-45) to this port to use as a normal LAN port (LAN
4).
For Fibre broadband, connect one end of an Ethernet
cable (RJ-45) to this port and the other end to the Fibre
modem.

LAN port

Connect one end of an Ethernet cable (RJ-45) to this port,
and the other end to a computer (or other Ethernet
device) with a LAN card installed.

USB port

Connect a USB storage device such as a USB hard drive to
this port. See

USB File Sharing

on page 88

Power switch

Use this switch to turn the router on/off.

Power socket

Connect the supplied power adapter to this socket.

Summary of Contents for Brightbox
















































































































































































































Search results

Summary of Contents for Brightbox

Reviews:

EE Brightbox, User Manual, Page: 12 / 207

Search results

Summary of Contents for Brightbox

Reviews: