Edirol RG-100 Owner'S Manual Download Page 115

Page: 115 / 128

115

Using the RS-232C interface

Play Mode Select

Selects the Play Mode.

• Command <stx>PM:<n>; (Command type: type 2)

<n> = ASCII codes for “1,” “2,” “3,” “4”

PM:1 = MOVIE (schedule off)

PM:2 = WEEKLY

PM:3 = DAILY 1

PM:4 = DAILY 2

❍

: When command is received, returns ACK, and selects Play Mode.

: Changes to Schedule Play mode.

Exit Movie Play

When this command is received during Movie Play Mode (EXIT
button is lighted), after current movie playback is finished, changes
to Schedule Play mode.

• Command <stx>EM; (Command type: type 1)

❍

: When command is received, returns ACK, and changes to

Schedule Play mode after current movie playback is finished.

: When command is received, just returns ACK.

Mute

Mutes the display, sound, and MIDI. The same action as when
MUTE button is pressed.

• Command <stx>MT; (Command type: type 1)

Mute Undo

Releases mute.

• Command <stx>MU; (Command type: type 1)

Time Adjust

Adjusts the time of the RG-100 internal clock. (The same action as
when signal is transmitted from the TIME ADJ remote control
terminal.)

0–29 seconds return to 0, and 30–59 seconds move further 1 minute
and start from 0.

• Command <stx>TJ; (Command type: type 1)

Shutdown

Shuts down the RG-100.

• Command <stx>DN; (Command type: type 1)

Reboot

Reboots the RG-100.

• Command <stx>RB; (Command type: type 1)

Play
Mode

MOVIE

WEEKLY

DAILY 1

DAILY 2

Schedule
Play

❍

Movie Play

❍

Play
Mode

MOVIE

WEEKLY

DAILY 1

DAILY 2

Schedule
Play

Movie Play

❍

000RG-100.book 115 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands