Edirol RG-100 Owner'S Manual Download Page 80

Page: 80 / 128

Creating a movie

You can change the screen to edit the Scheduler function, or return to the MAIN
MENU screen, etc.

fig.editor27.eps

• To change to the SCHEDULER screen

Click [SCHEDULER].

• To return to the MAIN MENU screen.

Click [MAIN MENU].

If you click these buttons to change screens without saving the current state of the
palette, a dialogue window appears. Click to select from the following:

• [Save]: Save the current state of the palette, and change the screen.

• [Don’t save]: Do not save the current state of the palette, and change the screen.

• [Cancel]: Cancel this operation.

Changing screens

[SCHEDULER]

[MAIN MENU]

[SHUTDOWN]

You can place the unit in
standby mode by clicking
[SHUTDOWN]. To power off
the unit, Press the POWER
button (p. 26).

000RG-100.book 80 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands