Edirol PCR-M30 Owner'S Manual Download

Page: 92 / 124

System settings

Perform steps 1-3.

Use the

[DEC]

[INC]

buttons or the

[1]

[3]

keys to specify KEYBOARD PORT SET.

(

➔

“Specifying the port”

(p. 59))

The specified port will indicate in the display.

Press the

[ENTER]

button.

Perform steps 1-3.

fig.hyo

Use the

[DEC]

[INC]

buttons or the

[0]

[1]

keys to switch H-ACTIVITY ON /

OFF.

The display will indicate either “ON” or “OFF.”

Press the

[ENTER]

button.

Perform steps 1-3.

Use the

[DEC]

[INC]

buttons or the

[0]

[1]

keys to specify the USB MIDI DRIVER MODE.

FPT = Fast Processing Technology for MIDI Transmission:

Effective use is made of the USB bandwidth according to the amount of MIDI data to be transmitted,
ensuring that MIDI data processing will always occur optimally.

Press the

[ENTER]

button.

KEYBOARD PORT SET (Keyboard: 4)

H-ACTIVITY ON / OFF (Keyboard: 5)

USB MIDI DRIVER MODE (Keyboard: 6)

Original driver

*FPT

technology is used to perform high-speed MIDI transfer.

Normally, we recommend that you use this mode.

Generic driver

Select this if you are using the standard MIDI driver provided by
your operating system.

OFF

PCR-M30/50/80.book 92 ページ２００５年１１月１０日　木曜日　午後２時４９分

Summary of Contents for PCR-M30





























































































































Search results

Summary of Contents for PCR-M30

Reviews:

Related manuals for PCR-M30

Brands by name

Popular brands

Edirol PCR-M30, Owner'S Manual

Search results

Summary of Contents for PCR-M30

Reviews:

Related manuals for PCR-M30

Brands by name

Popular brands